Logbook

July 2012

July 24, 2012

I'm back from OZ. Stopped by ACS and they have made some good progress.

They ran the car on the Dyno to test actual RPM vs. MPH and the car came in spot on to original specs (see the attached RPM vs. MPH data)

We did notice that the right rear Rotoflex may need to be shimmed as a vibration is coming out of the rear end as the car reaches about 75 MPH. Scott and Al think the place to look is at the Roto so we'll see what they come up with.

The Headliner is in and now just a matter of fitting up the new door panels and wheel arch panel.

The windshield now has a new Gasket and trim piece and the Hatch back window will receive the same treatment. Also, the two side vent windows are getting new gaskets. The car looks better each day. It is sure to be a very nice little driver - I need to start looking for a sound system. I'm going to make this my first project when the car comes home.